NIWO Handpiece Kit
Dental High and Low Speed Handpiece Kit 2/4 Holes. High speed handpiece is standard push button type and single-way water spray. Low speed kit is E-type connector and wrench type. Precise technology, Steady, no vibration while revolving, offering a steady operation.
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135��C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece :
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm.
- Fastening of the instruments with a turning latch.
- Autoclavable 135��C
- For any lab or E-type motors
Straight Nosecone:
- Working pressure: 0.3MPa.
- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise).
- Noise: ���68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Mortor:
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 2/4 Holes
- Max speed 20,000 min-1
|
| Low Speed Kits Specification |
| Air-in Pressure(kg/c���) |
Motor Rotation(rpm |
Air Wastage:(N1/min) |
| 2.5 |
22,000 |
42 |
| 3 |
25,000 |
51 |
| 4 |
27,000 |
72 |
| High Speed Handpiece Specification |
| Description: |
Standard Push button type, high speed handpiece, Single-way water spray |
| Needle Change Type: |
Push button |
| Air Pressure: |
180~250 KPa (1.8~2.5 kgf/cm2) |
| Water Pressure: |
198Kpa (2 kg) |
| Rotation Speed: |
370,000-420,000 rpm |
| Head Hight: |
13.14 mm |
| Head Diameter: |
��11.2 mm |
| Bur Applicable: |
��1.59mm~��1.6mm��21mm~23mm (diameter��length) |
| Noise: |
���70dB |
| High speed handpiece push button 2/4 Holes: |
2 each |
| E-type air motor 2/4 Holes: |
1 each |
| Straight nose cone |
1 each |
| Contra Angle handpiece: |
1 each |
| Water spray nozzle: |
1 each |
| Oil spray nozzle: |
1 each |
| CAP Spanner: |
